Vatech EzRay Chair Скачать руководство пользователя страница 5

Страница: 5 / 86

Notice

EzRay Chair (VEX-S300C) User Manual

Notice

The

EzRay Chair (VEX-S300C)

is an intra-oral dental X-ray system.

This manual contains descriptions, operational instructions, imaging procedures for the

EzRay Chair (VEX-S300C)

dental X-ray system. It is recommended that you

thoroughly familiarize yourself with this manual to make the most effective use of this

equipment. Read and understand all cautions, safety messages and warnings in this

manual.

Keep this manual with the equipment always and review the operating procedures and

safety instructions if needed.

The illustrations/photos of the equipment in this manual are only for illustration

purposes. The actual equipment may differ.

Due to continuous technological improvements, the manual may not contain the most

updated information. For further information not covered in this manual, please contact

us at:

Phone:

(+82) 1588 9510

E-mail:

[email protected]

This document is originally written in English.

The

EzRay Chair (VEX-S300C)

is referred to as

Equipment

System

in this

manual.

Manual Name: EzRay Chair (VEX-S300C) User Manual

Document number: VDH-UM-076

Version: 1.43

Publication Date: 2020-08

Содержание EzRay Chair























































































Результаты поиска

Содержание EzRay Chair

Отзывы:

Похожие инструкции для EzRay Chair

Бренды по названию

Популярные бренды

Vatech EzRay Chair, Руководство пользователя

Результаты поиска

Содержание EzRay Chair

Отзывы:

Похожие инструкции для EzRay Chair

Бренды по названию

Популярные бренды