INSTRUCTION MANUAL
QUARTZ HEATER
MOD. R-8016
DESCRIPTION
Voltage: 220-240V
Frequency:50/60Hz
Two heating power: 1100W/2200W
Quartz heating element
With thermostat protection
Tip-over switch protection
Outdoor use
ASSEMBLY
1.
Carefully turn the appliance upside down to fit the castors.
2.
Slide the wheel plate at the right position.
3.
Secure the wheel plate by lightening the butterfly nut.
4.
Put the appliance in the upright position.
5.
Take out the cable from the cable bracket backside.
OPERATION
1.
Switch the heater to one of the following power settings:
•
I
–
low heating power;
•
II
–
high heating power;
NOTE!
This device will cool slowly after the power is shut off. Allow the heater to cool prior to any
movement. The built-in carry handle should be used for easy movement.
When this device is overheated it is automatically turned off by a special security system. Unplug the
device and let it cool down before activating it again.
