INSPECTION/ CLEANING OF HEAT EXCHANGER
17
4 MONITORING
The user must ensure that the entire installation is maintained periodically by
the installer.
Remove the plug from the mains socket before commencing maintenance work.
1x per four years
•
Dismantle the door panel.
•
Remove the filter trays from the unit.
•
Pull the strap of the heat exchanger, never remove it!
•
If necessary, clean the heat exchanger by wiping the four surfaces with
a damp cloth.
•
Do not use aggressive or solvent cleaning agents.
•
Before pushing back the heat exchanger, check the tray of the
condensation drain.
•
Carefully slide the exchanger back into the device without damaging the
sealing rubbers.
•
Slide the filter trays back into the unit.
•
Mount the door panel.
INSPECTION /
CLEANING OF HEAT
EXCHANGER
