aXsGUARD Identifier 3.0.2.0 Product Guide v1.5
Registration
6.3
Registration without on-site Internet Access
An aXsGUARD Identifier is registered for a specific IP Address. Without the License referencing the correct IP
address, services such as authentication are not operational. Registration to acquire the License requires an
Internet connection to the VASCO Service Center. If the network where the aXsGUARD Identifier will be operational
has no Internet connection, the aXsGUARD Identifier needs to be temporarily located on a network with Internet
connection to complete registration. The IP address to be entered during registration, however, is the IP Address
where the aXsGUARD Identifier will be operational, not the temporary location.
After registration, the IP address of the aXsGUARD Identifier can be modified back to the IP address where it will be
operational, using manual configuration as explained in section
6.4
Change in IP Address
A change in IP address of the aXsGUARD Identifier renders the license invalid. The Configuration Tool and
Administration Web Interfaces are accessible for configuration and management, but no services, such as
authentication, are available. The aXsGUARD Identifier automatically detects that the IP address has changed and
that the license is no longer valid. A warning message is displayed in the Configuration Tool, with a link to the re-
registration wizard.
In this case registration only requires the IP address to be changed. Information already entered during first time
registration does not need to be re-entered.
The data is sent to the VASCO Service Center and a license key returned, which is automatically assigned to the
aXsGUARD Identifier. The old IP address is removed as explained in the first time set-up (see section
). The old
license key remains stored in the server component (see section
). The old IP address can be reassigned to the
aXsGUARD Identifier, as the license key remains available for that IP address unless the server component is
removed manually.
6.5
Upgrade from a DEMO to Commercial License
Upgrading from a demo to a commercial license requires re-registration with the Registration Wizard. The
'Commercial License' type needs to be specified during the Registration Wizard, and the license and serial
numbers entered.
Information already entered during first time registration does not need to be re-entered.
The data is sent to the VASCO Service Center and a license key returned, which is automatically assigned to the
aXsGUARD Identifier.
6.6
Replacement of aXsGUARD Identifier
In the rare event of an aXsGUARD Identifier failure, full first-time registration is required (see above).
©
2009 VASCO Data Security
63
