3. Pre-Installation Tasks and Considerations
3.1. Setup Information
Collecting the following information before you start will help to speed up your installation:
n
an unused IP address in your network
n
the default gateway setting in your network
n
DNS Server IP address(es) for your network
n
DNS Suffix(es) (optional)
n
Proxy Server settings (optional)
n
IDENTIKEY Appliance Maintenance Reference (for a Commercial License only)
n
IDENTIKEY Appliance Serial Number (for a Commercial License only)
n
an appropriate network cable, no longer than 3.0 meter in length
3.2. Multi-Device Licensing and Multi-Device Activation Limitations
As of version 3.7, IDENTIKEY Authentication Server supports a new model for licensing and activating a
DIGIPASS authenticator: Multi-Device Licensing and Multi-Device Activation.
This new licensing and activation model applies to the following models of the DIGIPASS authenticator:
n
E-signature DIGIPASS: DIGIPASS 760
n
Software DIGIPASS: DIGIPASS for Mobile and DIGIPASS for APPS
Note
The new functionalities introduced in the context of Multi-Device Licensing, Multi-Device Activation, and the
Secure Channel feature are aimed at the banking security market only. This implies that certain of these func-
tionalities will not be available for typical enterprise security deployments.
Warning
The Multi-Device Licensing and Multi-Device Activation functionality using the Secure Channel feature requires a
SOAP provisioning and / or SOAP signature license!
With the Multi-Device Licensing model and its one-to-one relationship between a user account and a DIGIPASS
serial number license, a user account can optionally be bound to several DIGIPASS instances. Multi-Device Activ-
ation, which is an activation process in two steps, guarantees that only the intended end user can perform the
device activation.
3. Pre-Installation Tasks and Considerations
IDENTIKEY Appliance 3.11.12 - Installation and Maintenance Guide
12
