Vascat ID Series, Руководство по эксплуатации и обслуживанию

Страница: 7 / 64

OPERATION AND MAINTENANCE MANUAL
ID MOTORS
PAGE: 7
CODE: CTT52 EDITION: 03 RELEASE: APRIL 2019
Subject to technical changes without prior notice
1.4 Intended use
WARNING
VASCAT motors are to be used in industrial installations. They comply with the requirements of the harmonised standards of the
EN 60034 series.
Said units are parts designed to be mounted on machines in accordance with the current machines directive. Start-up is not
allowed until the end product is checked and found to be compliant with said directive (please see, among others, the EN 60204-1
standard).
VASCAT ID motors must be used only for the applications provided in the catalogues and the related technical documentation.
If third-party products and parts are used, they must be previously approved by VASCAT.
The correct and safe operation of the products requires their correct transport, storage, installation, assembly, operation and
maintenance.
The allowed ambient conditions must be observed. The use of ID motors in hazardous areas is strictly prohibited unless they have
been designed specifically for said circumstance, in which case the indications and warnings given in the related documentation
must be observed.
1.5 Qualified personnel
WARNING
VASCAT motors must be installed and operated in accordance with the specifications given in this document. Only qualified
personnel are authorised to intervene when, in accordance with the manual, they have all the technical know-how and skills
required to handle, start up and connect the motors in accordance with safety standards.
Qualified personnel refers to the individuals who are capable of recognising the risks associated with their field of activity and
avoid associated hazards.