Varytec Hero Wash 640FX, Руководство пользователя

Страница: 19 / 36

7.4 Settings
Use the ‘Setting’ menu to adjust the device parameters.
1.
Press [SET] to activate the main menu.
2.
Press [UP] or [DOWN] until the display shows ‘Setting’ and confirm the selec‐
tion with [SET] .
3.
Press [UP] or [DOWN] to select the desired submenu or the desired value and
confirm the selection with [SET] .
The following sub menus are available:
Menu level
2
Menu level
3
Menu level 4 Description
‘Pan Reverse’ ‘YES’ Pan reversal in opposite direc‐
tion of rotation is activated.
‘NO’ Pan reversal in normal direc‐
tion of rotation is activated.
‘Tilt Reverse’ ‘YES’ Tilt reversal in opposite direc‐
tion of rotation is activated.
‘NO’ Tilt reversal in normal direc‐
tion of rotation is activated.
‘Pan Limit’ ‘Starting
point’
‘0…540’ Sets the starting point of the
rotation angle.
‘Ending
point’
‘0…540’ Sets the ending point of the
rotation angle.
‘Tilt Limit’ ‘Starting
point’
‘0…220’ Sets the starting point of the
tilt angle.
‘Ending
point’
‘0…220’ Sets the ending point of the
tilt angle.
‘Reset Motor’ ‘YES’ Motor reset is triggered.
‘NO’ The motor is not reset.
‘Factory
Reset’
‘YES’ The device is reset to factory
default settings.
‘NO’ The device settings are not
reset.
‘Home
Position’
Setting the start parameters
Detailed information about
this menu item can be found
under
Ä
‘Setting the start
parameters’ on page 22 .
‘DMX Fail’ Behaviour on DMX control failure
‘Hold’ If the DMX control fails, the
last setting is retained.
Operating
Hero Wash 640FX
19
moving head