Varta element Series, Инструкция по эксплуатации

Страница: 72 / 159

72
Subject to modification!
Updated 10/2017
Figure 12: AC connector
1
Opening for locking when inserting
To release: Push in snap-in nose
2 Union nut for strain relief
3 Connector housing
4
Opening for snap-in nose (on both sides).
For locking when mounting the connector
5 Contact insert

Insert the wires according to Figure 13: Assignment AC-
connector (connection side) into the screw connections in
the contact insert and screw tight.
i
Ensure that the conductor is tightly fixed in the
connections.

Insert the contact insert into the connector housing. Both
parts must audibly snap into the snap-in noses at the
sides.