POWXG3009
EN
Copyright © 2014 VARO
P a g e
|
8
www.varo.com
9.2
Maintenance
Note: To ensure long and reliable service, carry out the following maintenance regularly.
Regularly check for obvious defects such as loose fixings, and worn or damaged
components.
Check that covers and guards are undamaged and correctly fitted.
Carry out necessary maintenance or repairs before using.
The grass trimmer will continue to rotate for a while after the power is
switched off.
9.3
Knife Maintenance
To remove the worn knife (9), push it in direction of the arrow until it snaps off the pivot.
Clean the pivot of any residual plastic/debris with a sharp knife.
To refit the new knife, place the eyelet over the pivot and pull outwards until it snaps into
place.
10 TECHNICAL DATA
Rated voltage
220-240~
Rated frequency
50Hz
Rated Power
250W
No load speed
12000 min
-1
Cutting width
230 mm
Cutting system
knives
Weight
1.7kg
11 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
79dB(A)
Acoustic power level LwA
96 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
4.1m/s²
K = 1,5 m/s²
12 STORAGE
Electric tools should be kept in a dry place when not in use.
13 WARRANTY
This product is warranted for a 36-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding : batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
