POWX300
EN
Copyright © 2014 VARO
P a g e
|
5
www.varo.com
You can now clean the stove, fireplace or barbecue by using the nozzle. If the nozzle
becomes blocked by a piece of charcoal or similar, switch off the ash vacuum cleaner.
Carefully tap the nozzle against the inside of the stove or fireplace to remove the object.
Note: Before use the ash vacuum, make sure all connectors and the dust
filter subassembly (10) is tightly fastened. The container and dust filter
must be completely dry.
8 OPERATION
Before you start the appliance, make sure that the filter is in the position.
Unwind the power cord.
Plug the appliance and switch on.
Unplug the appliance after use
≤
60
℃
!!! For use with cold ashes only!
9 CLEANING AND MAINTENANCE
If the suction strength deteriorates during use, turn off the ash vacuum cleaner.
Once the container is full to the suction nozzle, empty the contents of the container.
Once you have sucked up 250-300 litres of ash, clean the filters
Remove the suction hose (7) and loosen the cover with the lock tabs.
Hold the dust filter and loosen the V type nut by hand as (fig. 3)
Remove the cover and dust filter from the metal rod (fig. 4)
Wash the dust filter by clean and warm water.
Dry the dust filter before re-use.
Caution: Do not use cleaning agents to clean the plastic parts of the tool. A
mild detergent on a damp cloth is recommended. Water must never come
into contact with the tool.
10 TROUBLE SHOOTING
PROBLEM
CAUSE
ACTION
Motor does not start
-Power cord not firmly
plugged into outlet.
-Outlet damaged.
-Cleaner not switched on.
-Plug unit firmly.
-Check the Outlet.
-Switch on the appliance
Suction power is weaker
-Unit clogged
-Dust filter needs cleaning
-Dust container not in
position.
-Filter blocked
-Remove the blockage.
-Clean the dust filter.
-Attach the dust container
again to the cleaner.
-Clean the filter
11 TECHNICAL DETAILS
Model nr.
POWX300
Voltage / frequency
220-240V/50Hz
Power input
1200 W
Tank volume
20 litre
Tank size
Ø285 mm, height 310 mm
Suction hose
Ø3,85 cm, length 100 cm
