VARO Powerplus POWX075700, Руководство пользователя

Страница: 10 / 12

POWX075700
EN
Copyright © 2020 VARO
P a g e | 10
www.varo.com
10 CLEANING AND MAINTENANCE
Before performing any work on the equipment, pull the power plug.
10.1 Cleaning
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
Make sure no water can reach the inside of the power tool!
10.2 Connecting cable
If the connecting cable (or mains plug) is damaged, it must be replaced. Replacement of the
connecting cable should only be carried out by a qualified specialist (qualified electrician).
11 TECHNICAL DATA
Nominal Voltage 230-240 V ~ 50 Hz
Power rating 1500 W (S6 25%)
No load speed 5000 min-1
Protection class II
Blade size 210 mm x 30 mm
12 CUTTING CAPACITY
Worktable tilting
angle Head tilting angle Height x width (mm)
90° 90° 55 x 120 mm
45° 90° 55 x 83 mm
90° 45° 30 x 120 mm
45° 45° 30 x 83 mm
13 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA 101 dB(A)
Acoustic power level LwA 113 dB(A)
ATTENTION! Wear hearing protection when sound pressure is
over 85 dB(A).
14 STORAGE
▪
Thoroughly clean the whole machine and its accessories.
▪
Store it out of the reach of children, in a stable and secure position, in a cool and dry
place; avoid too high and too low temperatures.
▪
Protect it from exposure to direct sunlight. Keep it in the dark, if possible.
▪ Don’t keep it in plastic bags to avoid humidity build-up.