background image

 

POWX00425 

EN

 

Copyright © 2021 VARO 

P a g e

 | 

9

 

www.varo.com 

8.5.3 

Wood drilling 

Mark the place where you want to drill with a punch or a nail. To avoid splintering on 
breakthrough, either clamp a piece of scrap wood to the back of your work piece or continue 
the hole from the back of the wood when the drill bit first breaks through. 

9  MAINTENANCE 

9.1 

General 

Your tool has been designed to operate over a long period of time with a minimum of 
maintenance. 

 

Continuous satisfactory operation depends upon proper tool care and regular cleaning. 
Clean your tool using a damp cloth. 

 

Your charger does not require any maintenance apart from regular cleaning, unplug it 
before cleaning. 

 

Use a soft brush or dry cloth. 

 

KEEP VENTILATION SLOTS CLEAN! Periodically check the air vents for dust or other 
debris. Clean with compressed air (max. 3 bar) 

Do  not  use  any  abrasive  or  solvent-based  cleaner.  Use  clean  cloths  to  remove  dirt,  carbon 
dust, etc. 
WARNING:  Do  not  allow  brake  fluids,  gasoline,  petroleum-based  products,  penetrating  oils, 
etc.  come  in  contact  with  plastic  parts,  they  contain  chemicals  that  can  damage,  weaken  or 
destroy plastic. 
WARNING:  Always  wear  safety  goggles  or  safety  glasses  with  side  shields  when  using 
compressed air to clean tools. If the operation is dusty, also wear a dust mask. 

BATTERIES:  The  battery  pack  for  this  tool  is  equipped  with  a  Li-ion 
rechargeable  battery.  Do  not  disassemble  battery  pack  and  attempt  to 
replace the batteries inside. 

9.2 

Service 

Have  your  power  tool  serviced  by  a  qualified  repair  person  using  only  identical  replacement 
parts. This will ensure that the safety of the power tool is maintained. 

10 STORAGE 

Store your tool in a clean, dry, frost free environment. 
Battery storage 

 

Store your batteries in a cool area. Optimal temperature for storing your Li-ion battery for 
longer term is 2°C.  (capacity loss will only be 6% / year (compared to 20% at 25°C)).  
Never store batteries in discharged condition. 

 

It is better for Li-ion batteries to recharge them frequently.  Optimal long time storage 
charge for your Li-ion battery is at 40% of their capacity.  

Содержание POWERPLUS POWX00425













Отзывы: