POWEG3010
EN
Copyright © 2021 VARO
P a g e
|
8
www.varo.com
▪
Use only as much throttle as is needed to do the job. Excessive engine speed is
unnecessary.
▪
Always keep your body to the carburettor side of your trimmer, and never to the silencer
side.
▪
During the first few minutes when a new machine is first used, grease may come out of
the gearbox. Since this is excess grease, it is not a cause for alarm. Just wipe it off when
the engine is switched off.
8.3.2
Vertical operation (Fig. 6)
▪
When rotating the rear handle to the right, hold the rear handle with your right hand, and
the front handle with your left hand.
▪
When rotating the rear handle to the left, hold the front handle with your right hand, and
the rear handle with your left hand. Cut using a circular movement.
8.3.3
Horizontal operation (Fig. 7)
▪
Tilting the trimmer 5 to 10° towards the object to be cut will make things easier and
produce good results.
Always follow the safety precautions. The hedge-trimmer must only be used
to trim hedges or small bushes. It is forbidden to cut other types of material.
Do not use the hedge-trimmer as a lever to lift, move or break objects, nor lock
it on fixed supports.
9 MAINTENANCE
Our machines have been designed to operate for a long period of time with a minimum of
maintenance. Continuous and satisfactory operation presupposes proper machine care and
regular cleaning.
System /
component
Procedure
Before
use
Every
25
hours
Every
50
hours
Every
100
hours
note
E
n
g
ine
Fuel leaks,
fuel spillage
Wipe up
V
Fuel tank, air
filter, fuel
filter
Inspect/clean
V
V
Replace if
necessary
Idle adjusting
screw
See
adjusting
idling speed
V
Replace
carburettor
if
necessary.
Spark
plug
Clean and
readjust
electrode
gap
V
GAP: 0,6-
0,7mm,
replace if
necessary
Cylinder fins,
intake air
cooling vent
Clean
V
Silencer,
spark
arrester,
cylinder
exhaust port
Clean
V
