POWEB2520
EN
Copyright © 2018 VARO
P a g e
|
4
www.varo.com
4
SYMBOLS
In this manual and/or on the machine the following symbols are used:
Denotes risk of personal
injury or damage to the tool.
In accordance with essential
requirements of the European
directive(s).
Read manual before use.
Class II - The machine is double
insulated; Earthing wire is
therefore not necessary (only for
charger).
Do not expose charger and
battery pack to water.
Ambient temperature 40 °C max.
(only for battery).
Do not incinerate battery
pack or charger.
Use battery and charger only in
closed rooms.
Wear noise protection.
Wear a mask In dusty conditions.
Laser radiation!
Do not stare into beam.
Mandatory use of eye protection.
5
GENERAL POWER TOOL SAFETY WARNINGS
Read all safety warnings and all instructions. Failure to follow all warnings and instructions
may result in electric shock, fire and/or serious injury. Save all warnings and instructions for
future reference. The term "power tool" in the warnings refers to your mains operated (corded)
power tool or battery operated (cordless) power tool.
5.1
Work area
▪
Keep work area clean and well lit. Cluttered and dark areas invite accidents.
▪
Do not operate power tools in explosive atmospheres, such as in the presence of
flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or
fumes.
▪
Keep children and bystanders away while operating a power tool. Distractions can cause
you to lose control.
5.2
Electrical safety
Always check that the power supply corresponds to the voltage on the
rating plate.
▪
Power tool plugs must match the outlet. Never modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power tools. Unmodified plugs and matching
outlets will reduce risk of electric shock.
