POWE60015
EN
Copyright © 2017 VARO
P a g e
|
7
www.varo.com
9 CLEANING AND MAINTENANCE
Attention! Before performing any work on the equipment, pull the power
plug.
9.1
Cleaning
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
Regularly clean the machine housing with a soft cloth, preferably after each use.
Keep the ventilation slots free from dust and dirt.
If the dirt does not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water, etc. These
solvents may damage the plastic parts.
Do not submerge the motor housing in water!
9.2
Cleaning the tub
Empty and clean the tub (7) after each use.
Dry the tub carefully after the machine has been used for vacuuming up liquids.
9.3
Cleaning the dust filter
Shake out the dust from the dust filter (15) after each use.
10 TECHNICAL DATA
POWE60015
Rated Voltage
220-240 V
Rated Frequency
50 Hz
Rated Power
1,000 W
Tank capacity
15 L
Cable length
3.5 m
Suction power
15 kPa
Tank material
Stainless steel
Motor quantity
1
Tank size
235 x 355 mm
Blowing function
Yes
Tube type
3 pieces
Hose length
1.5 m
Vacuum type
Dry & wet
11 SERVICE DEPARTMENT
Damaged switches must be replaced by our after-sales service department.
If the connecting cable (or mains plug) is damaged, it must be replaced by a special
connecting cable which is available from our service department. Replacement of the
connecting cable should only be carried out by our service department (see last page) or
by a specialist (qualified electrician).
