POWDP15640
EN
Copyright © 2021 VARO
P a g e
|
11
www.varo.com
CAUTION After long time of use, the cylinder case becomes hot. Therefore,
be careful not to burn your hands.
WARNING Don’t apply big pressure to the machine. The hammer
mechanism is activated by applying a slight pressure on the tool when the
chisel bit is in contact with the work-piece.
10 CLEANING AND MAINTENANCE
10.1
Cleaning
▪
Keep the ventilation slots of the machine clean to prevent overheating of the engine.
▪
Regularly clean the machine housing with a soft cloth, preferably after each use.
▪
Keep the ventilation slots free from dust and dirt.
▪
If the dirt does not come off use a soft cloth moistened with soapy water.
▪
Never use solvents such as petrol, alcohol, ammonia water, etc. These solvents may
damage the plastic parts.
10.2
Maintenance
▪
Our machines have been designed to operate over a long period of time with a minimum
of maintenance. Continuous satisfactory operation depends upon proper machine care
and regular cleaning.
11 TECHNICAL DETAILS
Rated voltage
20 V
Electric motor type
Brushless
Rotation speed
0-1350 min
-1
Drill capacity concrete
22 mm
Drill capacity steel
13 mm
Drill capacity wood
30 mm
Impact rate
0-4750 strks/min
Impact force
3 J
4 functions
Second handle type
Adjustable auxiliary handle
Soft grip
Yes
Motor winding material
Copper
12 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
86dB(A)
Acoustic power level LwA
97dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
aw (Vibration)
10.5m/s²
K = 1.5 m/s²
