POW5100
EN
Copyright © 2015 VARO
P a g e
|
6
www.varo.com
Withdraw the clamping flange (4) and the grinding wheel
Replace the wheel and reassemble, carrying out the operations in reverse order. (Do not
over tighten the nut).
Run the grinder “unloaded” for a few seconds.
The purpose of this operation is:
To tighten the grinding wheel, hold the grinding wheel firmly by hand and tighten the nut (
the thread is opposite-handed to the direction of rotation, causing automatic tightening)
To detect any error in assembly
9 TECHNICAL SPECIFICATIONS
Power supply
230V ~ 50Hz
Power consumption
120W (30min:S2)
Idling speed
2950 min
-1
Protection class
I
Disc dimensions
125 x 16x 12.7mm
10 NOISE
Noise emission values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
63 dB(A)
Acoustic power level LwA
76 dB(A)
ATTENTION! Wear hearing protection when sound pressure is over 85
dB(A).
11 WARRANTY
This product is warranted for a 24-month period effective from the date of purchase by the
first user.
This warranty covers all material or production flaws excluding: batteries, chargers,
defective parts subject to normal wear & tear such as bearings, brushes, cables, and
plugs, or accessories such as drills, drill bits, saw blades, etc. ; damage or defects
resulting from maltreatment, accidents or alterations; nor the cost of transportation.
Damage and/or defects resulting from inappropriate use also do not fall under the
warranty provisions.
We also disclaim all liability for any bodily injury resulting from inappropriate use of the
tool.
Repairs may only be carried out by an authorised customer service centre for Powerplus
tools.
You can always obtain more information at the number 00 32 3 292 92 90.
Any transportation costs shall always be borne by the customer, unless agreed otherwise
in writing.
At the same time, no claim can be made on the warranty if the damage of the device is the
result of negligent maintenance or overload.
Definitely excluded from the warranty is damage resulting from fluid permeation, excessive
dust penetration, intentional damage (on purpose or by gross carelessness), inappropriate
usage (use for purposes for which the device is not suitable), incompetent usage (e.g. not
following the instructions given in the manual), inexpert assembly, lightning strike,
erroneus net voltage. This list is not exhaustive.
Acceptance of claims under warranty can never lead to the prolongation of the warranty
period nor commencement of a new warranty period in case of a device replacement.
Devices or parts which are replaced under the warranty therefore remain the property of
Varo NV.
