POW0350
EN
Copyright © 2015 VARO
P a g e
|
5
www.varo.com
If there are devices for connecting dust extraction and collection facilities, please ensure
that they are attached and used correctly. Using such devices can reduce dust-related
hazards.
5.4
Power tool use and care
Do not expect the power tool to do more than it can. Use the correct power tool for what
you want to do. A power tool will achieve better results and be safer if used in the context
for which it was designed.
Do not use the power tool if the switch cannot turn it on and off. A power tool with a broken
switch is dangerous and must be repaired.
Disconnect the plug from the power source before making adjustments, changing
accessories, or storing power tools. Such preventive safety measures reduce the risk of
starting the power tool accidentally.
Store power tools, when not in use, out of the reach of children and do not allow people
who are not familiar with the power tool or these instructions to operate it. Power tools are
potentially dangerous in the hands of untrained users.
Maintain power tools. Check for misalignment or jammed moving parts, breakages or any
other feature that might affect the operation of the power tool. If it is damaged, the power
tool must be repaired. Many accidents are caused by using poorly maintained power tools.
Keep cutting tools sharp and clean. Properly maintained cutting tools with sharp cutting
edges are less likely to jam and are easier to control.
Use the power tool, accessories and cutting tools, etc., in accordance with these
instructions and in the manner intended for the particular type of power tool, taking into
account the working conditions and the work which needs to be done. Using a power tool
in ways for which it was not intended can lead to potentially hazardous situations.
5.5
Service
Your power tool should be serviced by a qualified specialist using only standard spare
parts. This will ensure that it meets the required safety standards.
6 SPECIFIC SAFETY WARNINGS
Do not vacuum up highly inflammable liquids, acids or thinners.
Do not vacuum up water at a temperature above 60 °C.
Do not vacuum up toxic substances.
Never vacuum up dry waste material or dust without dust filter in place.
Check whether the dust filter has been removed when using the machine far vacuuming
up liquids.
If you use an extension cord, it must be of a watertight construction.
7 ASSEMBLY
7.1
Mounting the swivel castors
Remove the motor housing.
Turn the tub (5) upside down and insert the swivel castors (7) in the openings. Push the
wheels in the foreseen openings, so that it forms a square like shape.
Turn the tub upright again.
Re-fit the motor housing.
7.2
Mounting the hose
Insert the hose (8) in the connection (6) and press it on firmly.