POWXG8020LI
EN
Copyright © 2014 VARO
P a g e
|
8
www.varo.com
9 CLEANING AND MAINTENANCE
Warning! Before performing any work on the equipment, always remove the
battery.
Check your machine regularly before starting the work.
Damaged cutting blades have to be repaired or exchanged by a qualified service man
before working with the machine
After each cutting operation, clean the cutting blade with a soft brush and cloth with
lubricating fluid oil and spray a thin layer of fluid protective oil on the completes blade.
Always keep the ventilation slots in motor housing clean
Never clean or spray a machine with water .clean the motor housing only with a moist
cloth and never apply detergents or solvents! These could ruin the plastic parts of the
machine ,Finally, dry the motor housing carefully.
Always have your hedge trimmer’s blades sharpened or replaced at a qualified workshop
10 STORAGE
Remove the battery pack and
keep your hedge trimmer in a safe, dry place out of children’s
reach.
Store the machine with the supplied protection cover.
Only use original accessories and spare parts.
11 TECHNICAL DATA
Type
POWXG8020LI
Battery voltage / capacity
18 VDC / 1500mAh
Battery type
Li-ion
Cutting capacity
12 mm
Blade length
535 mm
No load speed
2400min
-1
Charger
:
Input Voltage ~Frequency
230-240VAC, 50-60 Hz, 45W
OUTput voltage / current
19,5 VDC, max. 2,2 A
Battery charger
Type
1 hour fast charger
12 NOISE
Noise values measured according to relevant standard. (K=3)
Acoustic pressure level LpA
78 dB(A)
Acoustic power level LwA
92 dB(A)
ATTENTION!
Wear
hearing
protection
when
sound
pressure
is
over 85 dB(A).
aw (Vibration)
1,7 m/s²
K = 1,5 m/s²