POWXG60210
EN
Copyright © 2015 VARO
P a g e
|
11
www.varo.com
10.2.2 Resetting for side-discharge mowing (Fig. 8)
WARNING: only with a stopped motor and standstill cutter.
1.
Lift the rear cover and remove the grass catch bag.
2.
Mount the discharge channel.
3.
Lift sideward flap for side discharge
4.
Mount the discharge guide for side discharge on the support pin of the sideward flap.
5.
Lower the sideward flap- the flap lies on the discharge channel.
10.2.3 Mowing with the grass catch bag
WARNING: only with a stopped motor and standstill cutter.
1.
For mowing with the grass catch bag, remove the mulching wedge and discharge
channel for side discharge and mount the grass catch bag.
2.
Removing the mulching wedge.
-Lift rear cover and remove the mulching wedge.
-Removing the discharge guide for side discharge:
3.
Lift sideward flap and remove discharge channel.
-The sideward flap automatically closes the discharge opening on the housing by mean of
spring force.
-Regularly clean the sideward flap and discharge opening form grass rest and stuck dirt.
11 MAINTENANCE
IMPORTANT - Regular, careful maintenance is essential for keeping the
safety level and original performance of the machine unchanged in time.
Keep all nuts, bolts and screws tight to be sure the equipment is in safe working condition.
Regular maintenance is essential for safety and performance.
Never store the equipment with fuel in the tank inside a building where fumes can reach
an open flame, a spark or a source of extreme heat.
Allow the engine to cool before storing in any enclosure.
To reduce the fire hazard, keep the engine; exhaust silencer, battery compartment and
petrol storage area free of grass, leaves, or excessive grease. Do not leave containers
with grass cuttings in doors.
Replace worn or damaged parts for safety. For reasons of safety, do not use the
equipment with worn or damaged parts. Parts are to be replaced and not repaired. Parts
that are not of the same quality can damage the equipment and be dangerous for your
safety.
If the fuel tank has to be drained, this should be done outdoors and when the engine is
cool.
Wear strong work gloves when removing and reassembling the blade.
Check the blade's balance after sharpening.
Check the self-closing guard and grass-catcher frequently for wear and deterioration.
Whenever the machine is to be handled, transported or tilted you must:
wear strong working gloves;
grasp the machine at the points that offer a safe grip, taking account of the weight and its
distribution.
