Varmebaronen Vedolux 55, Руководство по установке и обслуживанию

Страница: 12 / 24

12 Värmebaronen Vedolux 55
Installation must take place according to existing
regulations and standards.
Chimney
Vedolux 55 has a suction fan and the chimney require-
ments are therefore low.
If the boiler is connected higher up the chimney than a
previous boiler was connected, the lower, inactive part
must be filled.
min 280 mm
min. 11 in.
Minimum 11 in. between rear of boiler and wall!
280 mm
Chimney
Position of
boiler
The boiler is tested with a 7.1 in. diameter chimney with
a vertical connection. All deviations from this installa-
tion entail a risk of the resistance in the chimney being
higher. A higher resistance in the chimney means that
the fan is unable to convey flue gases out in the same
way and the boiler may have lower output.
A chimney with a large diameter produces better flue
gas evacuation the taller it is as the natural draught
helps. A chimney with a small diameter will have poorer
flue gas evacuation if it is tall as the flue gas will have a
long way to travel through a narrow pipe and the natural
draught will not be enough to compensate for the long
distance.
For the boiler to deliver the promised output, the chim-
ney should not have an area that is too small or be too
long. You should also bear in mind that other factors
such as chimney hoods, angles, insulation, whether the
inside is smooth or rough, etc. also affect the resistance
in the chimney.
Flue pipe
The rotary flue pipe is fixed with four bolts. Do not forget
the gasket. The thermometer is installed on the front
detachable plate of the flue pipe.
Hole for installing a
flue gas thermometer
System in principle
This is a system in principle. The actual system must be
installed according to existing standards and the instruc-
tions that accompany each component.
ÖPPET SYSTEM
LUFTNING
SLUTET
SYSTEM
KV VV S
R
CW HW RR
R
VENTILATION
OPEN SYSTEM
CLOSED
SYSTEM
CW cold water
HW hot water
RR riser
R return immersion heater
stop valve
automatic vent valve
The principle diagram shows the Vedolux with Aqualux
and Aqualux UB accumulator tanks and Ackstyrning 3
accumulator control. The documentation supplied with
each product contains more information. Follow the
installation instructions provided.
≥
2”
≥
11”
≥
39.4”