4
Värmebaronen EK 15E
Menu - handling
Handling
Indicators and buttons
Green
Permanently
on
The electric flow heater has voltage.
Flashing
Output connection is restricted.
Yellow
Permanently
on
Displays a modifiable parameter.
In row 0, solid yellow means that
a warning is acknowledged but
the cause remains.
Fast flashing Parameter has been changed but
not acknowledged .
Flashing
Warning
Red
Flashing
Alarm, which has not been
acknowledged.
Permanently
on
Acknowledged alarm as long as
the cause has not been corrected.
The buttons are used to navigate the menus:
moves up in the menu list.
moves down in the menu list.
decreases the value.
increases the value.
acknowledges the changed value.
Menus
The menu system consists of three levels: the User level,
Service level and Advanced service level.
Menu row
Each menu contains a number of rows. The menu bar
number appears on the display, followed by a decimal
point and a value. At larger values, the display switches
between displaying the row number and its value.
Editable value
An editable menu row is indicated by the yellow indicator
light. When the value is changed, the indicator flashes.
The new value is only applied after confirming by pressing .
The old value is removed if the row is left with
or
.
User level
Reading and modification of the most common parameters.
Menu row 0 is the row that normally appears, and the menu
automatically returns here from other menus if no button
is selected for a certain period of time.
Service level
This is where the parameters are found that are usually
adjusted when commissioning the electric flow heater.
Access to "Service level" is obtained by simultaneously
pressing in any menu row in "User level" and
.
The same action is used to return to "User Level".
Advanced Service Level
Settings used less frequently and manual run output
stepping and circulation pump.
Access to the "Advanced Service level" is obtained by setting
the value "21" in the last menu bar, 12, in "Service level".
Return to the menu item "Service level" is done by going
back with
.
Return to "User level" is done by simultaneously pressing
and
.
Screen saver
The screen saver will be activated 15 minutes after the
last button press.
The menu returns to display of the current boiler
temperature.
"21-lock" for "Advanced service level" is reset.
If there are no unacknowledged alarms, the display will
turn off and only the indicators will be lit.
