VAR-SOM-6UL based on NXP i.MX 6UltraLite/ ULL
Evaluation Kit Quick Start Guide
Features:
1.
I2C/SPI Header (J23)
2.
LVDS B Header (J22)
3.
LVDS B 4
th
Line Header (J21)
4.
LVDS A Header (J20)
5.
LVDS A 4
th
Line Header (J19)
6.
DSI/SPI/QSPI Header (J18)
7.
Analog Signal Header (J17)
8.
I2C/SAI Header(J14)
9.
Resistive Touch Connector (J16)
10.
Capacitive Touch Connector (J15)
11.
Reset Button (SW3)
12.
Wake Up Button (SW4)
13.
MIPI-CSI2 Camera Connector (J13)
14.
Back Button (SW5)
15.
Line-In Connector (J12)
16.
Power Indication LEDs (D1, D2, D4)
17.
HP Out Connector (J11)
18.
Boot Select Switch (SW2)
19.
Main Power-On Switch (SW1)
20.
12VDC Power Input Jack (J10)
21.
General Purpose LEDs (D21, D23)
22.
Debug connector (J9)
23.
SATA Connector (J7)
24.
SATA Power Connector (J8)
25.
µSD-Card Connector (J6)
26.
OSB OTG Connector (J5)
27.
USB Host Connector (J4)
28.
Fan Power Connection (J28)
29.
Ethernet 2 Connector (J3)
30.
Ethernet 1 Connector (J2)
31.
DMIC (U13)
32.
RTC Lithium Cell Connector (JBT1)
33.
UART/CAN Connector (J26)
34.
HDMI/Camera Connector (J25)
35.
Mini-PCIe Connector (J24)
Evaluation kit initial Setup
1.
Carefully remove the 7” LCD and
Concerto-Board from the package.
2.
Connect the 7” LCD Display and Touch cables to
the Evaluation Kit connectors J15, J20
respectively.
Note
:
Display cable
– connect the cable with the red wire
on pin 1.
Touch cable
– connect the cable with the metal
contacts facing down.
3. Plug the USB type A to micro B cable between the
USB debug connector (J9) and a PC USB port.
