VariQuest® Design Center 2300C Unpacking and Setup Instructions
Step 1: Unpack the box and check the contents
The VariQuest Design Center 2300C (DC2300C) and its accessories
are packed in a cardboard carton with foam padding for
protection during shipment. Carefully unpack the system and
keep the packing materials for future use.
Verify the items in the box. If an item is missing or appears to be
damaged, contact your authorized VariQuest Dealer immediately.
Included in the box:
- All-in-one Touch PC - Power Cord - Keyboard & Mouse
(optional*)
*The DC2300C is equipped with a touch-enabled screen. It is not
necessary to connect the optional keyboard and mouse in order
to use the VariQuest Design Center Software.
Step 2: Adjust the tilt
The stand allows you to tilt the Design Center 2300C to your
personal preference.
Step 3: Connect the power cord
A. Connect the female end of the power cord into the power
supply brick (1).
B. Connect the other end of the power cord to an outlet (2).
C. Connect the round end of the power cord to the power supply
connector on the back of the DC2300C (3).
(continued on reverse)
1
2
3
