Structure and function
Operating instructions
Page 22 of 62
VarioShaker 270 with control box
It
e
m
n
u
mbe
r:
V
A
-A
rt
-00018
|
V
e
rs
io
n
:
0
5
/2
0
1
9
_
e
n
3. Structure and function
3.1 Structure
The VarioShaker 270 with control box consists of a component separator (
1
) and
the control box (
2
). The control box from the VarioShaker 270 must be installed at
the place of use in a control cabinet authorized by the operating company. Due to
safety reasons, the control box may not be used outside of a locked control
cabinet.
Figure 3.1:
Structure
3.2 Functional description
On the VarioShaker, components are separated and isolated using vibrations. If
necessary, the components can be transported as specifically separated or in any
areas from the vibrating plate. Thes
e movements must be adjusted to the user’s
needs.
The components are added to the VarioShaker as bulk material. Normally a hopper
system is used for this. The valid tapping coordinates are determined through a
camera system and the component is removed with a handling system.
A very high separate rate is achieved through the precise movement of the bulk
material.
1
2
Содержание VA-Art-00018
Страница 2: ......
