TECHNICAL INFORMATION
AIR COOLING KIT INSTALLATION
Insert the respective washers and screws and
tighten with a screwdriver.
Connect the fan to the controller.
SIDE MOUNTING
Two fan kits are available for air cooling the pump,
when natural air convenction is insufficient.
Specification for small fan (mod. 969-9310):
−
air flow:
9 l/s (10 CFM)
−
input voltage:
24 Vdc
−
maximum power: 2.16 W
−
dimensions:
60x60 mm (2.36x2.36 inches)
Specification for large fan (mod. 969-9313):
The low power fan can also be mounted under the
pump as shown in the figure.
−
air flow:
25 l/s (51 CFM)
−
input voltage:
120 Vac, 50-60 Hz
−
maximum power: 17 W
−
dimensions:
119x119 mm
(4.69x4.69
inches)
BOTTOM MOUNTING
Open the package containing the feet and respec-
tive screws and install them as indicated in the in-
stallation of the base fixing kit.
Position the fan on the pump, ensuring that the
holes in the plate line up with those in the feet.
32
87-900-851-01(A)
