GEBRAUCHSANLEITUNG
1/94
CN929-7015M002
ALLGEMEINES
Dieser Apparat ist für Fachbetriebe bestimmt. Vor
Gebrauch sollte der Benutzer dieses Handbuch sowie
alle weiteren mitgelieferten Zusatzdokumentationen
genau lesen. Bei Nichtbeachtung - auch teilweise - der
enthaltenen Hinweise, unsachgemäßem Gebrauch
durch ungeschultes Personal, nicht autorisierten
Eingriffen und Mißachtung der einheimischen, hier zur
Geltung kommenden Bestimmungen übernimmt die
Firma Varian keinerlei Haftung.
In den folgenden Abschnitten sind alle erforderlichen
Informationen für die Sicherheit des Bedieners bei der
Anwendung des Geräts aufgeführt. Detaillierte
technische Informationen sind im Anhang "Technical
Information" enthalten.
In dieser Gebrauchsanleitung werden Sicherheits-
hinweise folgendermaßen hervorgehoben:
!
Die Gefahrenhinweise lenken die Aufmerksamkeit des
Bedieners auf bestimmte Vorgänge oder Praktiken, die
bei unkorrekter Ausführung schwere Verletzungen
hervorrufen können.
ACHTUNG
Die Warnhinweise vor bestimmten Prozeduren machen
den Bediener darauf aufmerksam, daß bei
Nichteinhaltung Schäden an der Anlage entstehen
können.
ANMERKUNG
Die ANMERKUNGEN enthalten wichtige Informationen,
die im Text hervorgehoben werden.
BESCHREIBUNG DES CONTROLLERS
Der Dual-Controller der Firma Varian ist ein Gerät zur
Steuerung von flexiblen Ionenpumpen, das nach den
spezifischen Angaben des Kunden fabrikseitig
vorkonfiguriert wird.
Der Dual-Controller kann in folgender Konfiguration
geliefert werden:
•
Vordere Schalttafel mit Tastenfeld, Display (16x2)
und Mikroprozessor-Karte
•
Fern-E/A-Karte
•
Karte für seriellen Datenaustausch (Option)
•
Stromversorgungskarte mit integriertem DSP zur
Verwaltung der Ausgangsspannung.
•
Hochspannungskarte(n)
Auf Anfrage ist der E-Net Dual Controller Base mit
positiver oder negativer Polung, mit 1 oder 2 Kanälen
erhältlich.
Der Dual-Controller kann bis zu 2 Ionenpumpen von
20l/s bis 500 l/s mit positiver oder negativer Polung
steuern. Er gewährleistet eine zuverlässige Ablesung von
Druckwerten bis zu 10
-11
Torr und verbessert die
Leistung der Pumpe innerhalb des ganzen
Arbeitsbereichs.
Der Dual-Controller kann in Modus LOKAL, FERN-E/A
und SERIAL über die Schnittstellen RS 232-422 und
485 gesteuert werden (die RS232 und RS485 Karte
sind Optionen).
Der E-Net-Anschluss und der Serienanschluss können
zusammen benutzt werden.
Wie dem System Steuerbefehle übergeben werden,
hängt von der Betriebsart des Controllers ab:
•
Im LOKAL-Modus werden alle Befehle über die
vordere Schalttafel eingegeben.
•
Im Modus Fern-E/A kommen alle Befehle über
Fern-E/A-Signale (Relaiskontakte), die an den
Stecker für Fernsteuerung auf der Rückseite
angeschlossen sind.
•
Im SERIAL-Modus kommen die Befehle über einen
lokalen Computer.
GEFAHR!