Task Chair with Headrest
2 People
No Tools
Holds up to
Recommended
Required
300 lb (136 kg)
1
2
3
x1
x1
x1
x1
Remove chair, air piston, foot ring, and base
from the packaging. With the large end down,
insert the piston through the foot ring (holes
facing down) and into the base. With the piston
firmly in place, slide the foot ring to the desired
position, and turn the attached knob to the right
to secure in place.
If the piston has a protective cap on the top,
remove it before proceeding. Line up the hole
underneath the seat with the top of the piston
and base assembly. With another person’s
assistance, carefully lower the chair back onto the
piston. Using even pressure, press down firmly on
the seat cushion a few times to ensure the seat is
fully engaged with the piston.
Once assembled, do not attempt to disassemble
the chair, as doing so could damage the product.
To attach the headrest, insert the bottom of
the headrest into the top of the chair and
press firmly to secure.
WARNING: To prevent injuries and product failure, do not use this chair for standing, climbing, or leaning. Do not use if the chair is damaged or incorrectly assembled.
