M
ENU
S
YSTEM
: M
ENU
F
UNCTIONS
02.9703.0001 A
17 December 2012
65
Menu Function Definitions
For easy reference, each possible menu item is listed alphabetically in the first column by its display
abbreviation. The second column follows with a definition of the abbreviation and then a third column
provides an explanation of its purpose and function.
Table 4-2: Menu Function Definitions
Display
Definition
Purpose
10 Min
10 Minutes
Sets Menu Display to automatically shut off after 10 minutes of non-use.
30 Sec
30 Seconds
Sets Menu Display to automatically shut off after 30 seconds of non-use.
5 Min
5 Minutes
Sets Menu Display to automatically shut off after 5 minutes of non-use.
Address
Address
Accesses option for setting luminaire DMX starting address.
All Seq
All Test
Sequences
Tests all internal mechanisms in sequence for X steps.
Auto
Automatic Opera-
tion
When set to "Auto", menu display will automatically orient itself is relation to
fixture’s hanging or sitting position (up or down).
Beam Sprdr
Beam Spreader
Mechanism
Specifies beam spread function for manual control (
Manual
or
Test
).
Blue
Blue LED
Specifies Blue color (intensity) for manual control (
Manual
).
CAL LEDs
Calibrates LEDs
To start LED calibration or to set LEDs to specific factory calibration level
Channel XXX
DMX Channel
Specifies DMX channel for display of current data value.
CMD Lock
Command Lock
Selects whether to set Command Lock - to lock-out access to various settings
from the console using the Control Channel.
Configure
System
Configuration
Accesses options for pan/tilt operation, LED Setup, dimmer operational set-
tings, and Menu Display defaults.
Constant Fans
Fixture Mode
Luminaire setup is in Constant Fans mode. This setting sets fans to maximum
speed and will keep them operating at full, regardless of LED junction temper-
atures.
Data
DMX Data
Accesses option for setting DMX address channel.
Dim Curve
Dimmer Operation
Specifies dimmer to operate in Curve or Linear Mode
Dimmer
Dimmer
Specifies dimmer mechanism for manual control (
Manual
).
Disable
Disable
Disables a function.
Display
Display
Accesses options for Menu Display illumination time and orientation.
Display
Display
Selects and sets menu display orientation of arrow direction.
(Currently Dis-
abled)
Display
Display
Selects and sets menu display orientation of arrow direction.
(Currently Dis-
abled)
Disp Tilt
Menu orientation
control
Sets the orientation of the menu display to match the luminaire orientation,
(
Auto
) automatic display orientation, standing (
Up
) or hanging (
Down
).
DMX
DMX
Accesses options for DMX system settings.
DMX Map
Selects DMX
Mode Operation
Allows users to select between four different DMX mapping operational modes
- Mode 1, Mode 2, Mode 3, or Mode 4.
See “DMX Operation” on page 22.
Download
Download
Initiates download of luminaire software.
Enable
Enable
Enables a function.
Encoder
Encoder
Accesses pan/tilt encoders for diagnostic testing.
Содержание VLX3
