XRpad2 4343
42
www.vareximaging.com
U
SER
M
ANUAL
14.0
Declarations
This section includes the manufacturers’ declaration of standards and/or regulations for which
the product complies.
14.1
Guidance and Manufacturer’s Declaration
Table 12
Guidance and Manufacturer’s Declaration of Electromagnetic Emissions
Guidance and Manufacturer’s Declaration of Electromagnetic Emissions
The X-ray detector is intended for use in the electromagnetic environment specified below. The installer,
X-ray system manufacturer, or user of the X-ray detector is responsible for the usage condition of the
detector to be within such environment.
Emissions Test
Compliance
Electromagnetic Environment – Guidance
RF-emissions CISPR 11
Group 1
The X-ray detector uses RF energy only for its internal
function; therefore, its RF emissions are very low and are
not likely to cause any interference in nearby electronic
equipment. Should any interference (EMC) be detected
with any other equipment, reposition the X-ray detector
or the other equipment away from each other.
RF-emissions CISPR 11
Class B (wireless)
Class A (wired)
The X-ray detector is suitable for use in industrial and
installed environments in the wired mode.
In the wireless mode the X-ray detector is suitable for use
in all environments within Class B.
Should any interference (EMC) be detected with any other
equipment, reposition the X-ray detector or the other
equipment away from each other.
Harmonic emissions
IEC 61000-3-2
Class B (wireless)
Class A (wired)
Voltage fluctuations/
flicker emissions
IEC 61000-3-3
Complies
Version
01
2017-11-03
