VAREL RXFM6, Руководство пользователя

Страница: 5 / 30

ENGLISH
5 - E

Receiver
The receiver (located in the right light) is a category 2 GFSK PLL receiver in SMT
technology, in compliance with the EN 300 220 European standard. The receiver can
operate on 2 channels to avoid RF disturbances present on the used channel. To allow
the channel change it is necessary to leave ON the vehicle tail lights (in RADIO mode)
to let the receiver and the transmitter to carry on the communication on the alternate
channel.

Lamps indications
The left tail light is also a low battery indicator, when the lights are turned ON, after the
lamp test, if the tail light blinks shortly every 4 seconds then the battery is run down and
must be recharged. If, after the lamp test, the right tail light blinks continuously ON for
2 seconds and OFF for 2 seconds, then there is no paired transmitter in memory. The
only usable mode will be the ON mode. Please, pair a transmitter before using the
RADIO mode (see the “Transmitter pairing” section).

ACQ pushbutton
This is the transmitter pairing and clear memory pushbutton.
TECHNICAL CHARACTERISTICS
GFSK receiver 869.450MHz or 869.950MHz automatically determined
Sensitivity: -98dBm with ±16kHz deviation
EN 300 220 receiver category: 2
Power supply: integral battery pack 10x1.2V NiMH
Average battery life: 8-9 hours
Working temperature range: -20 °C

+70 °C