Varec 7532, Инструкция по установке и эксплуатации

Страница: 65 / 106

65
7532 Commissioning
6.5.2 Envelope curve with VU 331
After the basic setup, an evaluation of the measurement with the aid of the envelope
curve ("
display
"
(09)
function group) is recommended.
Function "plot settings" (09A)
Here you can select which information is shown on the display:
• envelope curve
• env. curve+FAC (for FAC see
7500 RTG "Service manual and description of
instrument functions
")
• env. curve+suppress. (i.e. the tank map is also displayed)
Function "recording curve" (09B)
This function determines whether the envelope curve is read as:
•
single curve
or
• cyclic
Note!
If the envelope curve mode is active on the display, the measured values are updated in
a slower cycle time. Thus, it is advisable to leave the envelope curve mode after the
measuring point has been optimized.
⇒
E +
–
L0
0-F
M
Rx
xxxx-
07
-0
0-00
-e
n-
004
⇒
E
+ –