Varec 2920 Скачать руководство пользователя страница 91 | Manualshive

Страница: 91 / 194

Varec 2920 Скачать руководство пользователя страница 91

5 Display and Configuration Interface

Varec, Inc.

81

MODBUS Data

Note

The MODBUS Data menu is used only when monitoring communications or when

configuring a MODBUS Device.

The MODBUS Data menu contains parameters and allows configuration of the MODBUS data
point.

The MODBUS Data menu presents 4 options:

•  Display Only — data display, such as average temperature or vapor temperature
•  Commands — commands that can be executed from the MODBUS menu
•  Config Params — parameters that are used to configure data in MODBUS
•  All Params — scrolls through the Display, Commands, and Config parameters in one

menu

To Access MODBUS:

1. Press Enter to access the Main Menu. The System Menu point is automatically highlighted.

2. Press Minus ten times to move the highlight to MODBUS Data.

3. Press Enter and the MODBUS Data menu opens.

4. To select one of the options, press Minus to move the highlight to the option you want and

then press Enter.

Refer to the table below for more information on each MODBUS Data option.

Display Only

Description

Message

Current Request

Command

Type of Record

Num Requests

Number of Requests

Num Com Errors

Number of Requests with Errors

Config Params

Response Delay

Response Delay

All Params

Lists all Display and Config Params in a list.

Display Only

Commands

Config Params

All Params

Main Menu

HART Device

NMT Prothermo

MODBUS Data

MODBUS Data

10

«
...
89
90
91
92
93
...
»

Содержание 2920



































































































































































































Отзывы:

Нет отзывов