VLC5501 Vapormatic Immobiliser Installation Manual
12 of 21
1
2
3
4
Keypad Override Disc:
The Keypad Override Disc is a wireless battery powered driver identification tag,
which informs the security system about the presence of the driver. This overrides the
keypad, allowing the vehicle to start without using the keypad PIN number.
Attention!!! Do not leave the Keypad Override Disc inside the vehicles cabin or
in a 5 metre range, whilst the vehicle is not attended. This device overrides your
security, and should therefore be kept on your person at all times.
Note: This disc device operates within a 5 metre range, it transmits a signal every 20
seconds. Therefore once the ignition is switched on, it may take up to 20 seconds for
the Green keypad LED to illuminate and for the engine to be started.
The Keypad Override Disc consists of following parts:
1.
Enclosure (part1)
2.
Enclosure (part2)
3.
Electronic board
4.
Battery
Note:
Please ensure the positive plus sign on the battery matches the
positive plus sign on the battery holder.
With the battery correctly inserted, the red LED on the printed
circuit board will flash twice. Carefully place the combined circuit
board and battery into enclosure 1, and snap enclosure 2 into place.
