Vapor Clean II, Руководство пользователя

Страница: 8 / 15

Press the trigger on the handle to steam (fig. 19 – page 13), hold the trigger pressed to continuously
steam and release the trigger to stop the steam.
During the initial heat up process, the air inside the boiler always produces a
pressure that restricts the steam output. Therefore, after the first minute of
heating up, press the button on the handle a few times to release the air.
The steam regulator knob controls the steam output (fig. 20 – page 13) and
it turns 360°.
Turn the knob
to the left to increase the steam output volume. This
provides wetter steam and faster pressure loss. Turn the knob to the right
to lower the steam output volume. This provides dryer steam with
minimal pressure loss.
NOTE: Steam output volume will diminish faster if kept open at the
maximum. Mid to low setting is the best for most applications and it
maintains consistent steam output.
If the orange warning light turns ON (fig. 5 – page 12) as well as the audible buzzer, it means the
there is lack of water in the boiler. Open the boiler cap and fill the boiler with water. The machine
may be left on when filling the machine.
USING THE ACCESSORIES
All the accessories can be fitted directly onto the handle or onto the extension tubes.
Caution: check that the surfaces and the fabrics that you wish to steam clean
are suitable for this type of treatment before starting to clean them.
Rectangular floor brush with clips can be used with or without the cloth, for cleaning all smooth
floor surfaces and to freshen up carpets (Fig. 23 – page 13). Note: if using a cloth, if you may also
find that folding the cloth twice or even three time works best to create more of a “mop” like fabric
for better cleaning.
Caution: in the case of delicate surfaces always use the cloth.
Triangular brush – can be used with a cloth wrapped around for cleaning padding, mattresses,
kitchen furniture, hard to reach places and to freshen up garments.
Window squeegee - is for cleaning windows, mirrors, shower walls, etc. (fig. 25 – page 13). To use,
steam the glass first to loosen up any residue then put a cloth on the window seal or door track and
use squeegee at the top and work your way down to wipe glass clean. Condensation will run down
the glass as you work and the cloth will absorb it.
8