14
8.3
Filling the herb chamber
To fill the filling chamber with your favorite herbs, unscrew the top cap. There you can see the lower
net of your herb chamber.
This is the place where your herbs should be placed. Fill the chamber with your preferred amount, but
only up to the upper edge of the lower screen clamp.
CAUTION!
Fill the chamber only up to the upper edge of the lower mesh clamp and make
sure that there are no herbs at the upper edge of the lower mesh clamp.
Always fill the filling chamber completely up to the edge with crushed plant material. Do not compress
the plant material too much so that the airflow is not unnecessarily impeded. Remove any excess plant
material left around on the edge of the lower mesh clamp so that the lid can be screwed on properly.
