Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
VT-SBC35-APL | User Manual 43
3.7
Install Windows 10 System
3.7.1
Prerequisites
•
A USB drive with capacity no less than 8GB, preferably supporting USB 3.0
•
Bootable USB tool: rufus-xxx .exe (available in the release package under image
directory)
•
Windows 10 image
•
A host PC running Windows
•
A display cable to connect the Board and the host PC
3.7.2
Make a Bootable USB Drive for Windows 10
Plug the USB drive into the host PC. Run rufus-xxx .exe and it will automatically detect the
USB. Then follow the steps below to make a bootable USB drive.
1.
Click on
Device
and choose the USB you want to use from the drop-down;
2.
Select the ISO image you want to burn onto the USB from the drop-down and click
Select
;
3.
Generally, users would like to create a
Standard Windows installation
, and Rufus will
automatically detect the correct
Partition Scheme
based on the USB drive. Yet make
sure the partition scheme is
GPT
;
4.
Set the Target system as
UEFI
and the File system as
FAT32
or
NTFS
;
5.
Click
START
to make the bootable USB drive.
