Vantron SBC-RK35M, Руководство пользователя

Страница: 16 / 18

SBC-RK35M Boards User’s Manual
All rights reserved Page 16, Total 18
4.4 Hardware Operation Notes
a.
Power prepare: Please confirm the power input is 12V. And the reference current is 1A. Make sure
the power input positive is not reversed.
b.
Environment: For the assembled or debug platform, be sure there hasn’t any risk of circuit shortness
for the board. And make sure the anti static is done well.
c.
Debug message view: Using COM port on P3 (COM1) to view the debug message. It will show the
boot message. In PC side, communication hyper terminal or other serial software tools can be used.
The debug port setting is: baud rate 115,200bps, NO hardware control, no ODD/EVEN checking, 1
Stop bit. Suggest use a cross cable, in two Female header.