IQ Hub v1.1
14
/
22
3.6
Interface Description
3.6.1
MIC
Internal MIC with outstanding sensitivity and high SNR makes it very suitable for recording while
suppressing the environment noise.
3.6.2
WIFI and BT
The tablet supports 802.11 a/b/g/n/ac WiFi and BT 4.2. With a good performance internal
antenna, both WIFI and BT can achieve better connectivity.
3.6.3
Z-wave
The tablet has the function of Z-wave connectivity so we can use it in a lot of aspects such as
access control, appliance control, AV control, building automation, energy management, lighting,
security, and sensor networks for
the “Internet of Things”.
3.6.4
LTE
The tablet supports LTE Cat 1 function, delivering M2M-optmized speeds of 10Mbps downlink
and 5Mbps uplink. And it features ultra-low power consumption which can extend the battery
lifecycle without DC adapter plugging in.
(Report reference FCC ID:XMR201909EG91NAX)
3.6.5
Z
-wave
and
SRF
RF Card, 9
08
MHz - 9
16
MHz,319
.5
MHz
(Report reference FCC ID:2AAJXQS-SRF319)
3.6.6
Speaker
The tablet has an internal 1 watt speaker
3.6.7
Buzzer
There is a high SPL buzzer in tablet. It features high sound when turned on
3.6.8
Gas Gauge
A gas gauge is used to monitor the capacity of the li-polymer battery so we can figure
out the status of it precisely and immediately
3.6.9
Front Camera
The tablet has the ability to take beautiful photo and record the high resolution video.
3.6.10
RTC
The tablet has internal RTC so the system time can keep a long time if we didn’t turn it
on.
