Vantron
| Embedded in your success, Embedded in your better life
World-leading provider of embedded/IoT products and solutions
Vantron | G202 User Manual
50
Description of the numbered areas
1.
Locate the .ovpn file downloaded from
2.
Click
Connect
to upload the file
3.
After connection, an IP address assigned by OpenVPN server will be displayed here
4.
Input the IP address of the PLC (on the same network subnet as the Gateway LAN port)
5.
Input the virtual IP (on the same network subnet as the one assigned by OpenVPN server)
After finishing above configurations, you’ll need to install and run OpenVPN client on the
PC, then connect the running PLCs with the client to control the PLCs remotely. The
communication interface could be edited in
Interfaces
under
Network
Tab.
3.9
System
Apart from the device settings you might make in the previous sections, here you can
configure your Gateway in more details, including host name, time zone, administrative
password and so on.
3.9.1 System
Description of the numbered areas
1.
Synchronize the Gateway time with the browser (local) time
2.
Assign a name to the host
3.
Select a time zone
4.
Enable NTP online time adjustment
5.
Start the NTP server (the Gateway)
6.
NTP online time server
For log-related settings, click
Logging
tab next to the
General settings
tab. If you want to
change the interface language, just navigate to
Language and Style
tab following behind.
