STONEVAC II PLUS
120V
25799 Jefferson Ave.
Murrieta, CA 92562
1-800-VANIMAN (826-4626)
www.vaniman.com
STONEVAC II PLUS - 08/21 Page 3
3.
Replacing the filter cartridge
- Regularly check the filter to make sure it is secure and properly
seated against the filter mounting/sealing plate. Periodically, the filter cartridge will become worn or
clogged beyond the use of the
CLEAN
feature. In cases when dust collector usage is heavy, chang
-
ing interval may be as frequent as 3-6 months. To replace the filter, follow the instructions above to
remove and empty the dust bin. With the dust bin removed, reach underneath the Filter Cartridge
and unscrew the filter retaining nut. Remove the nut and washers and pull the filter downward then
forward out of the unit. Replace the filter with a new filter cartridge by performing the removal instruc
-
tions in reverse. Filter Cartridge re-order
P/N 97001
.
NOTE:
Be sure to replace the rubber washer FIRST and the metal washer SECOND. Securely fasten
the filter retaining nut. Improper installation may cause dust to pass into the air.
4. Electrical Protection
- The unit is protected by a circuit breaker. If the unit is plugged in and does not
operate, check to see if the circuit breaker was activated by inspecting it on the back of the unit where
the power cord enters the unit. If the circuit breaker was activated, push the button in the center to
reset it. If the unit still does not operate, contact your dealer or call the factory at 1-800-VANIMAN for
technical assistance.
RECOMMENDED USAGE
1. Individual work station (2½” hose) or dry model trimmer dust collection for trimming or grinding Die
Stone. While the StoneVac II PLUS was designed specifically for Die Stone, it will also handle other
dust developed at the same workstation such as alloy, porcelain, and acrylic.
2. The StoneVac II can be used with abrasives or micro-blasters. If used for this application, it is im
-
portant that the filter be serviced or replaced regularly. Additionally, Vaniman's pre-filter Accumulator
helps capture abrasive before it reaches the dust collector, increasing the life of the unit.
RECOMMENDED ACCESSORIES
Large Accumulator -
PN: VMC-A300
6ft Remote Switch -
PN: 10203
