WRM-10 USER’S MANUAL
REV 2
15
e.
The following screen will be displayed while the test is being performed:
After the transformer has been charged, the following screen will be displayed:
Run the voltage regulator tap switch.
f.
If no transient is detected as the taps are switching:
1.
The screen display will not change
2.
Turn or press the
[CONTROL KNOB]
to end the test. The following screen will
be displayed:
If a switch break is detected:
1.
The following message will be displayed:
2.
Turn or press the
[CONTROL KNOB]
to end the test.
TRANSIENT
DETECTED
NO TRANSIENT
DETECTED
V REG. TEST
RUN TAPS NOW
*XFMR CHARGING*