Install Hardware
© Vanderbilt 2016
26
- Vanderbilt will not be liable for any malfunction of the system if the customer
installs any non-certified 3rd-party application in the system.
- Vectis iX06 series support decoding resolution from D1 up to 20M
- DISCONNECT any USB device other than keyboard & mouse before the
system starts.
7.2.2
Vectis iX16/32/48
Vectis iX16/32/48 Rear Side
1.
USB port:
Connect a keyboard to one of the USB ports.
2.
USB port:
Connect a mouse to one of the USB ports.
3.
VGA / DVI / HDMI ports:
Connect a display monitor to either the VGA or
DVI or HDMI port.
4.
Power jack:
Plug the power cable to the power jack.
5.
LAN port:
Plug in a CAT-6 UTP cable to one of the RJ-45
Gigabit LAN ports, and connect the other end of
the cable to a switch that connects to the camera
network.
6.
Line-out port:
Plug a speaker to this port if necessary.
7.
RS232 port
Plug a RS232 cable for data connection
8.
Power button:
Hit this power button to power on the system.
Note: Reconnecting the system to power-supply will auto
power on the system.
- Vanderbilt will not be liable for any malfunction of the system if the customer
installs any non-certified 3rd-party application in the system.
- Vectis iX16/32/48 series support decoding resolution from D1 up to 20M.
- DISCONNECT any USB device other than keyboard & mouse before the
system starts.
Vectis iX16/32/48 Front Side
