Vanderbilt SPCK620, Руководство по установке и настройке

Страница: 95 / 368

Keypad user interface 12
SPCK620/623
95
Vanderbilt Installation & Configuration Manual A6V10276959
01.05.2016

To move the position of the cursor one character to the left and right
respectively, press the left and right arrow keys.

To exit from the feature without saving, press the BACK menu key.

To save the programmed setting press ENTER or OK.
Entering text
In Text Entry mode, both alphabetic characters (A-Z) and numeric digits (0 – 9) can
be entered.

To enter an alphabetic character, press the relevant key the required number of
times.

To enter a language specific special character (ä, ü, ö…) press button 1 to
cycle through the special characters.

To enter a space + special characters (+, -./[ ]…) press button 0.

To enter a digit, hold the relevant key down for 2 seconds and release.

To move the position of the cursor one character to the left and right
respectively, press the left and right arrow keys.

To exit from the feature without saving, press BACK.

To save the programmed setting press ENTER or OK.

To change the case of an alphabetic character, press the up/down arrow keys
when the character is highlighted by the cursor.

To toggle between upper and lower case for all subsequent characters, press
the hash (#) key.

To delete character to the left of the cursor, press the star key(*).
Selecting a programming option
In navigation mode, the Engineer/User selects one of a number of pre-defined
programming options from a list.

To scroll through the list of options available for selection, press the up and
down arrow keys.

To exit from the feature without saving, press BACK.

To save the selected option, press SAVE or OK.
12.2 SPCK620/623
12.2.1 Introduction
The Comfort keypad is a wall-mounted interface that allows:

Engineers to program the system through the Engineer Programming menus
(password protected) and to set/unset the system; a user can control the
system on a day-to-day basis.

Users to enter User Programming menus (password protected), and to perform
operational procedures (set/unset) on the system. (Please refer to the
SPC620/623 User Manual for more details of user programming)
The SPCK620 is equipped with soft keys and large graphical LCD for easy
operation. The functionality can be enhanced with key switch expander SPCE110
or indication expander SPCE120.
The SPCK623 is equipped with a proximity card reader (125 kHz EM 4102) for
easy user access, soft keys, large graphical LCD and voice annunciation support.
The functionality can be enhanced with key switch expander SPCE110 or
indication expander SPCE120.