Vanderbilt SPC4 Series Скачать руководство пользователя страница 172 | Manualshive

Страница: 172 / 402

Vanderbilt SPC4 Series Скачать руководство пользователя страница 172

17 Engineer programming via the browser

Engineer programming options on the SPC panel can be accessed via any standard web browser on a PC
and is PIN protected.

You can access Engineer Programming via the browser by entering the default Engineer PIN (1111). For
more details, see

Engineer PINs

This web server provides access to the complete set of programming features used to install and configure
the SPC system.

This programming option should only be provided to authorized installers of the SPC system.

Engineer Programming features on the SPC are divided into the following categories:

Soft Engineer Features

These features can be programmed without requiring the alarm system to be deactivated; they are
accessible directly upon entering Engineer mode.

Full Engineer Features

These features require the alarm system to be deactivated before programming can commence; these
features are accessible under the Full Engineer menu.

NOTICE: If ‘Engineer Exit’ option is enabled in System Options, the engineer is allowed leave Full
Engineer mode with alerts active but must acknowledge all alerts listed on the keypad or in the
browser before switching from Full Engineer mode to Soft Engineer mode.

The web server on SPC controller can be accessed using either the Ethernet or USB interface.

If programming with a browser interface, click

Save

when making changes.

Click

Refresh

to view the current programming values on a web page.

17.1 System Information

Click the

?

icon to view the Help menu which provides up-to-date information about the panel and the

functionality that is currently licensed on the system.

17.2 Ethernet interface

© Vanderbilt 2018

172

A6V10276959-d

11.2018

«
...
170
171
172
173
174
...
»

Содержание SPC4 Series



















































































































































































































































































































































































































Отзывы:

Нет отзывов