Vanderbilt Eventys EX4, Быстрый старт

Страница: 18 / 160

© Vanderbilt 2016 18
Figure 3.11
Add IP Camera
3. Select the detected IP camera and click the Add button to add it directly, and you can click the Search button to refresh
the online IP camera manually.
Or you can choose to custom add the IP camera by editing the parameters in the corresponding text field and then click
the Add button to add it.
3.8 Live View
Icons are provided on screen in Live View mode to indicate camera status. These icons include:
Live View Icons
In the live view mode, there are icons at the upper-right corner of the screen for each channel, showing the status of the
record and alarm in the channel for quick reference.
Alarm (video loss, tampering, motion detection, VCA or sensor alarm)
Record (manual record, continuous record, motion detection, VCA or alarm triggered record)
Alarm and Record
Event/Exception (event and exception information, appears at the lower-left corner of the screen.)
3.9 Recording Settings
Before you start:
Make sure that the disk has already been installed. If not, please install a disk and initialize it. You may refer to the user manual
for detailed information.
Purpose:
Two kinds of record types are introduced in the following section, including Instant Record and All-day Record. And for other
record types, you may refer to the user manual for detailed information.
After rebooting all the manual records enabled are canceled.
Steps: