6. Select the
Record
check box if the ACT365-VCU should record camera footage. The ACT365-VCU
will record approximately 20 days of camera footage (dependent on the type of scene the camera is
viewing). Once the ACT365-VCU data storage limit is reached, data is recycled. When data is
recycled, the oldest data is removed first.
If you do not select
Record
, the ACT365-VCU will support live view only.
7. Click
Add
.
The camera is added to the ACT365 Installer Portal at ACT365.eu.
A summary of the camera settings is displayed on the
Cameras
tab.
After a camera has been added, it appears in the
Selected Cameras
list and is accessible on ACT365.
5.3 Adding Cameras Manually
If a camera has not been discovered automatically, or is on a different IP subnet, you can add the camera
manually.
Note:
Only expert users should manually add cameras. A camera stream URL must be entered
manually, and any inaccurate data entered could adversely affect the ACT365-VCU operation.
To add a camera manually, log in to the ACT365-VCU web interface (see
on page 17), then:
1. Click the
Cameras
tab.
2. Click
Add Manual
.
The
Probe Device
dialog displays.
ACT365-VCU / ACT365-VCU2A / ACT365-VCUPoE – Installation and Operating Instructions
Configuring ACT365-VCU
© Vanderbilt 2019
20
A-100528-b
20.05.2019
