27
Induction principle
An induction coil is located under each heating zone. When it is engaged, it produces a variable
electromagnetic field which produces inductive currents in the ferromagnetic bottom plate of the
pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:
•
All ferromagnetic metallic pans are recommended (please verify it thanks a little magnet):
cast iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic
bottoms…
•
Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic, stoneware,
clay, stainless-steel non ferromagnetic…
The induction heating zone adapts automatically the size of the pan. With a too small diameter
the pan doesn’t work. This diameter is varying in function of the heating zone diameter.
If the pan is not adapted to the induction hob the display will show [ U ].
Sensitive touch
Your ceramic hob is equipped with electronic controls with sensitive touch keys. When your
finger presses the key, the corresponding command is activated. This activation is validated by
a control light, a letter or a number in the display and/or a “beep” sound.
For normal use press only one key at the same time.
Starting-up
•
Start-up/ switch off the hob :
Action
Control panel
Display
To start
Press key [
] 2s
[ 0 ]
To stop
Press key [
] 2s
Nothing or [ H ]
•
Start-up/ switch off a heating zone :
Action
Control panel
Display
Zone selection
Press selection key from zone
[ 0 ]
Increase power
Press key [ + ]
[ 1 ] to [ 9 ]
Decrease power
Press key [ - ]
[ 9 ] to [ 1 ]
Stop
Press key [ - ]
[ 0 ] or [ H ]
If no setting is made within 20 second it returns on standby position.
Recipient detection
The pan detection ensures a perfect safety. The induction doesn’t work:
•
If there is no pan on the heating zone or if this pan is not adapted to the induction. In this
case it is impossible to increase the power and the display shows [ U ]. This symbol
disappears when a pan is put on the heating zone.
•
If the pan is removed from the heating zone the operation is stopped. The display shows
[ U ]. The symbol [ U ] disappears when the pan is put back to the heating zone. The
cooking continues with the power level set before.
After use, switch the heat element off: don’t let the pan detection [ U ] active.
Downloaded from www.vandenborre.be
