INSTALLATION GUIDE
With the exceptions noted in the next
paragraph, Vanco warrants to the original
purchaser that the equipment it manufactures
or sells will be free from defects in materials
and workmanship for a period of two years
from the date of purchase. Should this product,
in Vanco’s opinion, prove defective within this
warranty period, Vanco, at its option, will repair
or replace this product without charge. Any
defective parts replaced become the property
of Vanco. This warranty does not apply to
those products which have been damaged
due to accident, unauthorized alterations,
improper repair, modifications, inadequate
maintenance and care, or use in any manner
for which the product was not originally
intended. Items integrated into Vanco products
that are made by other manufacturers, notably
computer hard drives and liquid crystal display
panels, are limited to the term of the warranty
offered by the respective manufacturers. Such
specific warranties are available upon request
to Vanco. A surge protector, power conditioner
unit, or an uninterruptible power supply must
be installed in the electrical circuit to protect
against power surges. If repairs are needed
during the warranty period the purchaser will
be required to provide a sales receipt/sales
invoice or other acceptable proof of purchase
to the seller of this equipment. The seller will
then contact Vanco regarding warranty repair
or replacement.
LIMITED WARRANTY
Every effort has been made to ensure that this
product is free of defects. The manufacturer
of this product cannot be held liable for the
use of this hardware or any direct or indirect
consequential damages arising from its use. It
is the responsibility of the user and installer of
the hardware to check that it is suitable for their
requirements and that it is installed correctly.
All rights are reserved. No parts of this manual
may be reproduced or transmitted by any form
or means electronic or mechanical, including
photocopying, recording or by any information
storage or retrieval system without the written
consent of the publisher. Manufacturer
reserves the right to revise any of its hardware
and software following its policy to modify and/
or improve its products where necessary or
desirable. This statement does not affect the
legal rights of the user in any way.
LIABILITY STATEMENT
AMP
Amp Power Output:
25W x 2 (RMS @ 8Ω),
40W x 2 (RMS @ 4Ω)
Speaker Terminal:
4-Pin Screw Terminal Connector
Variable Audio Input:
3.5mm Stereo Jack
Audio Input Formats:
Analog
Total Harmonic Distortion (THD): Less than 1%
Signal to Noise:
Dot input 91db AUX input 101db
Frequency Response:
20-20khz +- 1db
Adjustable Volume:
Fixed (requires variable audio source)
Line Level Input Sensitivity:
Dot: 410mV
AUX 652mV
POWER
Amperage
15a
Voltage
110v-240v
Certifications:
ETL, cETL, CE, FCC, PSE, RCM, & RoHS
Termination:
3-Wire Screw down
Grounding:
Yes
OTHER
Dimension (WxDxH):
5" x 5" x 4"
Weight:
1.31 lbs
SPECIFICATIONS
Designed by Jimmy Thu LLC
Manufactured in China for
VANCO International
Batavia, IL 60510 USA
www.vanco1.com
©2018
Amazon, Alexa, Echo Dot and all related logos are trademarks of Amazon.com, Inc. or its affiliates.
Spot for Dot Installation Guide.indd 1
7/27/18 5:19 PM
