2
Introduction
Congratulations and thank you for purchasing the BAV2500 or BAV4250
Beale Street Amplifier!
The BAV2500 and BAV4250 amplifiers can be configured for 4/8 ohm
zones, it can also be configured 70/100v or can be configured for any
combination of 4/8 ohm and 70/100v zones all at the same time!
Have one zone delivering 8 ohm, while a separate zone delivering 70v,
simultaneously. That’s some stuff, right? But there’s more...each zone can
be controlled by the sleek front panel or over TCP/IP for ON/OFF, Input,
Volume/Mute, Treble/Bass and Left/Right Balance. Once connected to a
network, the browser-based GUI allows for full control, monitoring, and DSP
to adjust nearly any aspect of the audio being output.
The BAV2500 amplifier is a two-channel digital professional audio amplifier
which can be set to 4/8 ohm, 70v or 100v outputs and provides up to 500W
per channel. There are 2 inputs which are balanced (3-conductor connector)
or unbalanced (RCA) which can be matrixed and sent to the 2 outputs.
The BAV42500 amplifier is a four-channel digital professional audio
amplifier which can be set to 4/8 ohm, 70v or 100v outputs and provides up
to 250W per channel. There are 4 inputs which are balanced (3-conductor
connector) or unbalanced (RCA) which can be matrixed and sent to the 4
outputs.
Finally, the BAV2500 and BAV4250 has a 110~120V/220~240V select
switch allowing it to be used just about anywhere there is AC Voltage.
And of course, it’s rack mountable and comes with removable rack ears. The
Beale Street BAV2500 and BAV4250 is ready for anything...anywhere.
Please read and follow the instructions in this guide to assure proper
installation and maximum performance of your new Beale Street BAV2500
and BAV4250 amplifier.
